DHC - 60.7 - Quick Setup menu

You can perform common settings on the television screen while playing.

1. Press Q on the remote controller.
The Quick Setup menu is displayed on the connected TV's screen.

2. Select the items with the cursors on the remote controller and then press Enter.

• To return to the previous screen, press Return.

3. Select the content with the cursors of the remote controller.

■ Listening Mode: Select the listening mode from the categories of "MOVIE/TV", "MUSIC", "GAME" and "THX". After selecting, press Enter button to confirm.

• It cannot be set when audio is played from the TV's speakers.

■ Audio: You can perform various audio settings including audio quality and speaker level adjustment.

• You cannot select this item when audio is output from the TV's speakers.

Bass, Treble: Adjust volume of the front speaker.

• It cannot be set if the listening mode is Direct or THX.

Phase Matching Bass: Suppress phase shift in the midrange to enhance bass sound. Thus smooth and powerful bass sound can be obtained.

• It cannot be set if the listening mode is Direct or THX.

Center Level, Subwoofer Level: Adjust the speaker level while listening to the sound. The adjustment you made will be reset to the previous status when you turn the unit to standby mode.

• Changes may not be possible depending on the speaker settings.
• This setting is not possible during MUTING or when using headphones.

Speaker Layout: Select the speakers to prioritize when back speakers and height speakers are connected at the same time.

• Changes may not be possible depending on the speaker settings.

A/V Sync: If the video is behind the audio, you can delay the audio to offset the gap. Different settings can be set for each input selector.

• It cannot be set if the listening mode is Direct.

AccuEQ Room Calibration: Enable or disable the settings made by automatic speaker setting. If this is to
be enabled, then normally you should select "On (All Ch)", and to disable just the front speakers you should select "On (ex. L/R)". The setting can be separately set to each input selector.

• This setting cannot be selected if the automatic speaker setting has not been performed.
• It cannot be set if headphones are connected or the listening mode is Direct.

Equalizer: Select "Preset1" to "Preset3" configured in "2. Speaker" - "Equalizer Settings" in the Setup menu. The same sound field setting is applied all ranges when set to "Off".

• It cannot be set if the listening mode is Direct.

Music Optimizer: Improve the quality of the compressed audio. Playback sound of lossy
compressed files such as MP3 will be improved. The setting can be separately set to each input selector.

• The setting is effective in the signals of 48 kHz or less. The setting is not effective in the bitstream
  signals.
• It cannot be set if the listening mode is Direct.

Late Night: Make small sounds to be easily heard. It is useful when you need to reduce the volume while
watching a movie late night. You can enjoy the effect only with Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, and DTS sources.

• Turning the unit to standby mode will set the setting to "Off". In case of Dolby TrueHD, the setting will be set to "Auto".
• The setting cannot be used in the following cases.
• If "3. Audio Adjust" - "Dolby" - "Loudness Management" in the Setup menu is set to "Off" when playing Dolby Digital Plus or Dolby TrueHD
• When the input signal is DTS and "Dialog Control" is other than 0 dB

Re-EQ, Re-EQ(THX): Adjust the soundtrack that was processed to enhance its treble, in order to make it
suitable for home theater.

• This function can be used in the following listening modes: Dolby Digital, Dolby Digital Plus, Dolby
  TrueHD, Multichannel, DTS, DTS-ES, DTS 96/24, DTS-HD High Resolution Audio, DTS-HD Master
  Audio, and DTS Express.
• In Re-EQ(THX), the following listening modes can be used: THX Cinema, THX Surround EX, and THX
  Ultra2 Cinema

Center Spread: Adjust the width of the sound field of the front channel when playing in the Dolby Surround listening mode. To spread the width of the sound field to the left and right, set to "On". To concentrate sound in the center, set to "Off".

• Depending on the speaker settings, this becomes "Off".

Dialog Control: You can increase the dialog portion of the audio in 1 dB steps up to 6 dB so that you can make dialog easier to hear over background noise.

• This cannot be set for content other than DTS:X.
• The effect may not be selectable with some content.

■ HDMI :
HDMI OUT: Select the HDMI OUT jack to be used for output.
Control TV: Set whether to enable the CEC link function for TVs connected through one of the HDMI
OUT MAIN or SUB jacks.

■ Information:

Audio: Displays the audio input source, format, number of channels, sampling frequency, listening mode, and number of output channels.
Video: Displays information such as the video input source, resolution, color space, color depth, 3D
information, aspect ratio, and output.
Tuner: Displays information such as the band, frequency, and preset number. This is displayed only
when "TUNER" is selected as the input source.