DHC - 60.7 - Rear Panel

RI REMOTE CONTROL jack: An Onkyo product with RI jack can be connected and synchronized with this unit.
DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio signals are input.
RS232 port: Connected to the home control system. (*)
USB port: A USB storage device is connected so that music files stored in it can be played. Connect a USB device with a USB cable to supply it with power.
ETHERNET port: Used for LAN connection
VIDEO IN/OUT jacks: Composite video signals input/output jacks.
HDMI IN/OUT jacks: Digital video signals and audio signals are transmitted between the unit and the
connected devices.
COMPONENT VIDEO IN/OUT jacks: Component video signals input/output jacks.
TUNER AM/FM(75Ω) terminal: The supplied antennas are connected.
HDBaseT™ IN/OUT jack: HDMI input signals are output via the Ethernet cable. As they are covered with a seal when shipped, remove it when you use the ports. Do not use the ports to connect the Ethernet port of network device. (*)
IR IN A/B, IR OUT jack: Connected to the multiroom remote control kit. (*)
12V TRIGGER OUT A/B/C jack: Allows you to connect a device with 12V trigger input jack to enable link operation between the device and the unit. (*)
PRE/LINE OUT ZONE 2/ZONE 3 jack: Audio output jack connected to the power amplifier and pre-main amplifier for multi-zone playback in a separate room.
AC INLET: The supplied power cord is connected.
GND terminal: The ground wire of the turntable is connected.
INPUT BALANCE L/R jacks: XLR-type balanced input jacks.
AUDIO IN jacks: Analog audio signals are input.
PRE OUT RCA jacks: A power amplifier or subwoofer with built-in amplifier is connected.
PRE OUT XLR jacks: XLR-type balanced output jacks to connect the multichannel power amplifier or
subwoofer with built-in amplifier. FRONT L/R jacks and HEIGHT L/R jack can be used for Bi-amping
connection.
＊ Special devices or cable connections are necessary to use the , , and functions. Contact the specialized stores for more information.