DTM-7.4 Display

 Lights in the following conditions.
       : Headphones are connected.
       Z2: ZONE 2 is on.
      : Connected by Bluetooth.
      : Connected by Wi-Fi.
       NET: Lights when connected to the network with the "NET" input selector. It will blink if incorrectly
                   connected to the network.

       USB: Lights when the "NET" input selector is selected, a USB device is connected and the
                   USB input is selected. It will blink if the USB device is not properly connected.
       HDMI: HDMI signals are input and the HDMI input is selected.
       DIGITAL: Digital signals are input and the digital input is selected.
Lights according to the type of input digital audio signal.
 Lights in the following conditions.
        TUNED*: Receiving AM/FM radio.
        FM ST*: Receiving FM stereo.
        SLEEP: Sleep timer is set.
        AUTO STBY: Auto Standby is set. ( →p79)
                         *North American models only
 MUTE: Blinks when muting is on.
 Speaker/Channel display: Displays the speaker channels being output.
      A: When audio is being output from the SPEAKERS A terminals
      B: When audio is being output from the SPEAKERS B terminals
      AB: When audio is being output from both the  SPEAKERS A and SPEAKERS B terminals
Displays various information of the input signals.
 Cursors : These may light when performing operations while "NET" is selected
        with the input selector. light when there are multiple folders or files that are available to be
        selected. light when text information does not fit with the range provided by "6".