Disclaimer: The program and accompanying online documentation are furnished to you for use at your own risk.
Our company will not be liable and you will have no remedy for damages for any claim of any kind whatsoever concerning your use of the program or the accompanying online documentation, regardless of legal theory, and whether arising in tort or contract.
In no event will our company be liable to you or any third party for any special, indirect, incidental, or consequential damages of any kind, including, but not limited to, compensation, reimbursement or damages on account of the loss of present or prospective profits, loss of data, or for any other reason whatsoever.
For the latest firmware contents and the firmware version, visit website.
• When this unit is connected to the network, notifications of firmware updates may be displayed. To update the firmware, select "Update Now" with the cursor buttons of the remote controller and press Enter. The unit automatically enters standby mode after "Completed!" is displayed, and the
update is completed.
To confirm the firmware version of your product, press the Setup button on the remote controller, and refer to "8. Firmware Update" - "Version" ( →p87).
Updating can take about 20 minutes. Furthermore, existing settings are
maintained regardless of the method used for update.
Updating the Firmware via Network
• While updating the firmware, do not do the following:
– Disconnecting and reconnecting cables, USB storage device or headphones, or performing operations on the unit such as turning the power off
– Accessing this unit from a PC or smartphone using their applications
• Check that the unit is turned on, and the connection to the Internet is secured.
• Turn off control devices (PC etc.) connected to the network.
• Stop an Internet radio, USB storage device, or server content being played.
• If the multi-zone function is active, turn it off.
• If "HDMI CEC" is set to "On", set it to "Off".
– Press the Setup button. Next, select "2. Control" and press Enter, then select "HDMI CEC" and select "Off".
* The descriptions may differ from the actual on-screen displays, however, operations and functions are the same.
Update
1. Press Setup.
The Setup menu is displayed on the TV screen.
2. Select "8. Firmware Update" - "Update via NET" with the cursor buttons in order and press Enter.
• If "8. Firmware Update" is not available for selection, wait until the system has started.
• You will not be able to select "Update via NET" if there is nothing to update.
3. With “Update” selected, press Enter to start the update.
• During the update, the TV screen may go black depending on the updated program. In that case, check the progress on the display of the unit. The TV screen will remain black until the update is complete and the power is turned on again.
• "Completed!" is displayed when the update is complete.
4. Press On/Standby on the main unit to turn the unit into standby mode. The process is completed, and your firmware is updated to the latest version.
• Do not use on the remote controller.
If an Error Message is Displayed
If an error occurs, is displayed on the display of the unit. (
represents an alphanumeric character.) Refer to the following descriptions and check.
Error Code
•
Ethernet cable not found. Connect the Ethernet cable properly.
•
Internet connection error. Check the following:
– Whether the router is turned on
– Whether this unit and the router are connected via the network Unplug and plug the power cords of this unit and the router. This may solve the problem. If you are still unable to connect to the Internet, the DNS server or proxy server may be temporarily down. Check the server operation status
with your Internet service provider.
• Others:
After removing the power plug once, insert it to the outlet, and then start the operation from the beginning.
Updating via USB
• While updating the firmware, do not do the following:
– Disconnecting and reconnecting cables, USB storage device or headphones, or performing operations on the unit such as turning the power off
– Accessing this unit from a PC or smartphone using their applications
• Prepare a 1 GB or larger USB storage device. The format of USB storage devices supports FAT16 or FAT32 file system format.
– Media inserted into a USB card reader may not be used for this function.
– USB storage devices equipped with the security function are not supported.
– USB hubs and USB devices equipped with the hub function are not supported. Do not connect these devices to the unit.
• Delete any data stored on the USB storage device.
• Turn off control devices (PC etc.) connected to the network.
• Stop an Internet radio, USB storage device, or server content being played.
• If the multi-zone function is active, turn it off.
• If "HDMI CEC" is set to "On", set it to "Off".
– Press the Setup button. Next, select "2. Control" and press Enter, then
select "HDMI CEC" and select "Off".
* Depending on the USB storage device or its content, long time may be required
for loading, the content may not be loaded correctly, or power may not be supplied
correctly.
* Our company will not be liable whatsoever for any loss or damage of data, or storage failure arising from the use of the USB storage device. Please note this in advance.
* The descriptions may differ from the actual on-screen displays, however, operations
and functions are the same.
Update
1. Connect the USB storage device to your PC.
2. Download the firmware file from the our company's website to your PC and unzip.
Firmware files are named as below.
Unzip the file on your PC. The number of unzipped files and folders varies depending on the model.
3. Copy all unzipped files and folders to the root folder of the USB storage device.
• Make sure to copy the unzipped files.
4. Connect the USB storage device to the USB port of this unit.
• If an AC adapter is supplied with the USB storage device, connect the AC adapter, and use it with a household outlet.
• If the USB storage device has been partitioned, each section will be
treated as an independent device.
5. Press Setup.
The Setup menu is displayed on the TV screen.
6. Select "8. Firmware Update" - "Update via USB" with the cursor buttons in order and press Enter.
• If "8. Firmware Update" is not available for selection, wait until the system has started.
• You will not be able to select "Update via USB" if there is nothing to
update.
7. Press Enter with "Update" selected, and start update.
• During the update, the TV screen may go black depending on the updated program. In that case, check the progress on the display of the unit. The TV screen will remain black until the update is complete and the power is turned on again.
• During the update, do not turn the power off, or disconnect or reconnect the USB storage device.
• "Completed!" is displayed when updating is completed.
8. Disconnect the USB storage device from the unit.
9. Press On/Standby on the main unit to turn the unit into standby mode. The process is completed, and your firmware is updated to the latest version.
• Do not use on the remote controller.
If an Error Message is Displayed
If an error occurs, is displayed on the display of the unit. (
represents an alphanumeric character.) Refer to the following descriptions and check.
Error Code
•
The USB storage device cannot be recognized. Check if the USB storage
device or USB cable is securely inserted to the USB port of the unit.
Connect the USB storage device to an external power source if it has its own
power supply.
•
The firmware file is not present in the root folder of the USB storage device, or the firmware file is for another model. Retry from the download of the firmware file.
• Others:
After removing the power plug once, insert it to the outlet, and then start the operation from the beginning.
Comments
0 comments
Please sign in to leave a comment.