DTM-7.4 Front Panel

On/Standby button

Master Volume dial
Phones jack: Connect headphones with a standard plug (ø1/4″/6.3 mm).
Dimmer button: Switches the brightness of the display with three levels. It cannot be turned off
       completely.
Zone 2 button: Controls the multi-zone function. ( →p61)

Off button: Switches the multi-zone function off.

 Input dial: Switches the input to be played.

 Bass dial: Adjusts the bass.
Treble dial: Adjusts the treble.
Balance dial: Adjusts the balance of the sounds output from the left and right speakers.
 Menu button: Used to display the menu.
       Memory button (North American models only): Used to register AM/FM radio stations.
Play/Pause button: Used for play operations when playing Music Server or USB.
       Tuning Mode button (North American models only) : Switches tuning to an AM/FM station between         automatic tuning and manual tuning.
Skip buttons : Used for play operations when playing Music Server or USB.
       Preset buttons (North American models only): Used to tune to registered AM/FM stations.
 USB port: Connect a USB storage device to play music files. You can also supply power (5 V/1 A)
        to USB devices with a USB cable.

 Hybrid Standby indicator: Lights up when any of the following functions is working or enabled in            standby state of this unit. When this  indicator is lighting, the power consumption in standby state i          increases, however, the increase in power consumption is minimized by entering the HYBRID                      STANDBY mode where only the essential circuits operate.
            – HDMI CEC ( →p78)
            – HDMI Standby Through ( →p78)
            – Network Standby ( →p79)
            – Bluetooth Wakeup ( →p79)

Remote control sensor: Receives signals from the remote controller.
            • The reception range of the remote controller is within a distance of approx. 16´/5 m, and
               an angle of 20° in vertical direction and 30° to right and left.
Display ( →p12)
Cursor buttons and Enter button: Select an item with the cursors, and
         press Enter to confirm your selection. Use them to tune to stations when using TUNER. ( →p46)
Speaker A/B buttons: Select the terminals to output audio from between SPEAKERS A/B.
Display button: Switches the information on the display. You can display information such as the                input source, volume, and input format when pressed repeatedly during play.
Setup button: You can display advanced setting  items on the TV and the display to have a more
        enjoyable experience with this unit. ( →p73)
Return button: Returns the display to the previous state while setting.