DRX-4.3 Troubleshooting Multi-Zone Function

Cannot ZONE-output the audio of externally connected AV components
      • To output audio from an externally connected AV component to ZONE 2, connect it to any of HDMI           IN1 to IN3 jacks. If the AV component is not equipped with an HDMI jack, use a digital coaxial                     cable, digital optical cable or analog audio cable. Also, the audio from externally connected AV
         components can be output to ZONE 2 only when the audio is analog or 2ch PCM signal. When the             AV component is connected to this unit with an HDMI cable, digital coaxial cable or digital optical             cable, change the audio output of the AV component to the PCM output.
     • When video and audio via HDMI input are output to ZONE 2, set "1. Input/Output Assign" - "TV Out          / OSD" - "Zone 2 HDMI" ( p148) to "Use" on the Setup menu.
     • To output audio from an externally connected AV component to ZONE 3, use an analog audio cable          for connection. Also, audio from externally connected AV components can be output to ZONE 3                only when it is an analog audio signal.
Others
     • If the audio signal is from the NET input selector, the zone output is not possible for DSD audio                 signals.