DRX 5.4-Rear Panel

1 DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with digital optical cable or digital coaxial cable.
2 TUNER AM/FM terminal: Connect the supplied antennas.
3 COMPONENT VIDEO IN jacks: Input AV component video signals with a component video cable. (Compatible only with 480i or 576i resolution.)
VIDEO IN jacks: Input AV component video
signals with an analog video cable.
4 Wireless antenna: Used for WI-Fi connection or when using a BLUETOOTH enabled device. Adjust the angles according to the connection status.
5 HDMI OUT jacks: Transmit video signals and audio signals with an HDMI cable connected to a

monitor such as a TV or projector.
6 HDMI IN jacks: Transmit video signals and audio signals with an HDMI cable connected to an AV
component.
7 ETHERNET port: Connect to the network with an Ethernet cable.
8 USB port: Connect a USB storage device to play music files ( →p105). You can also supply power (5 V/1 A) to USB devices with a USB cable.
9 SPEAKERS terminals: Connect speakers with speaker cables. (North American models support
banana plugs. Use a plug 4 mm in diameter.) Y plug connection is not supported.
10 AC INLET: Connect the supplied power cord.

11 GND terminal: Connect the ground wire of the turntable.
12 AUDIO IN jacks: Input AV component audio
signals with an analog audio cable.
13 IR IN A/B, IR OUT port: Connect a remote control receiver unit. ( →p69)
14 12V TRIGGER OUT A/B/C jack: Connect a device equipped with a 12V trigger input jack to enable power link operation between the device and this unit. ( →p70)
15 RS232 port: Connect a home control system equipped with an RS-232C port. For installing a home control system, contact the specialized stores.
16 PRE OUT jacks: Connect a power amplifier. ( →p55)
17 SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable.
Up to two powered subwoofers can be connected. The same signal is output from each SUBWOOFER PRE OUT jack.
18 ZONE 3 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to an integrated amplifier in a separate room (ZONE 3).
HEIGHT 2 PRE OUT jacks: Connect a power amplifier. ( →p55)
19 ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to an integrated amplifier in a separate room (ZONE 2).
ZONE B LINE OUT jacks: Simultaneously output the same audio source as the speakers (ZONE A) connected to this unit by connecting this unit to wireless headphones, wireless speaker transmitter, etc., using an analog audio cable.