DRX-8.4 - Input Formats and Selectable Listening Modes

You can select a variety of listening modes according to the audio format of the signal to be
input.

• Selectable listening modes when headphones are connected are Mono, Direct, and Stereo only.

(*1) You cannot select any mode other than Stereo, AllCh Stereo and Mono Music if the sampling rate is 5.6/11.2 MHz.
(*2) A center speaker or surround speakers need to be installed.
(*3) If the input source is Blu-ray Disc and the speaker layout is 5.1 ch or less, DD+ cannot be selected. Instead, the listening mode for DD can be selected.
(*4) This can only be selected when no surround back speaker is connected.
(*5) Surround back speakers need to be installed. Can be selected when the input format is 5.1 ch.
(*6) If the input format is any of the following and the number of channels is monaural, this listening mode becomes unavailable. – DTS, DTS 96/24, DTS Express, DTS-HD HR, DTS-HD MSTR, PCM, music file
(*7) Surround speakers or height speakers need to be installed.
(*8) A center speaker, surround speakers, or height speakers need to be installed.
(*9) Cannot be selected if "Speaker Virtualizer" is set to "Off".
(*10) Cannot be selected when the "IMAX Mode"  is set to "Off" (the default value is Auto).
(*11) Surround speakers need to be installed.
(*12) Cannot be selected when the input format is monaural.
(*13) The listening mode displayed depends on the speaker layout. Furthermore, when the setting for "Speaker Virtualizer"  is "Off" (the default value is On), then modes other than Atmos and DSur cannot be selected.
(*14) This cannot be selected when the input format is DTS Express.
(*15) Can only be selected when the "IMAX Mode" is set to "Off" (the default value is Auto).
(*16) Displayed as "DTS" on this unit.
(*17) Displayed as "DTS-HD" on this unit.